Numerical homogenization of network models and micro-mechanical simulation of paperboard

M. Görtz, PhD thesis, Chalmers University of Technology, 26 January 2024. Supervisors: A. Målqvist, F. Edelvik and G. Kettil.

Predicting Wind Comfort in an Urban Area: A Comparison of a Regression- with a Classification-CNN for General Wind Rose Statistics

J. Werner, D. Nowak, F. Hunger, T. Johnson, A. Mark, A. Gösta, F. Edelvik. Machine Learning and Knowledge Extraction. 2024; 6(1):98-125, 4 January 2024.

Proof of Concept in a Full-Scale Field Test for the Novel Micro-Turbine Drilling Technology from a Cased Borehole in Granite Rock

N. Geissler, F. Garsche, V. Samus, B. Polat, F. Di Mare, R. Bracke. SPE Journal (2023), 10 November 2023.

Numerical homogenization of spatial network models

F. Edelvik, M. Görtz, F. Hellman, G. Kettil, A. Målqvist. Computer Methods in Applied Mechanics and Engineering, Vol 418, Part B, 11659. 5 January 2024. Online 9 November 2023.

Advancing Dynamic Process Modeling of Comminution and Classification Circuits: A Paradigm Shift with GPU-Enabled DEM Solver

J. Quist, F. Edelvik. VIII International Conference on Particle-Based Methods (PARTICLES 2023), Milano, Italy, 9-11 October 2023.

A DEM-FEM Coupling Framework Applied to Railroad Infrastructure Simulations

A. Ullrich, J. Quist, C. Cromvik, K. Jareteg, A. Bilock, F. Edelvik. VIII International Conference on Particle-Based Methods (PARTICLES 2023), Milano, Italy, 9-11 October 2023.

Calibration of AM Powders for Optimization of Recoating Process Using DEM

N. Sani, J. Quist, K. Jareteg, A. Bilock, L. Cordova, E. Hryha, F. Edelvik. VIII International Conference on Particle-Based Methods (PARTICLES 2023), Milano, Italy, 9-11 October 2023.

Modelling of urban flooding in the built environment using an SPH implementation

F. Hunger, A. Ullrich, J. Dvořák, K. Jareteg, A. Bilock, J. Quist, F. Edelvik, VIII International Conference on Particle-Based Methods (PARTICLES 2023), Milano, Italy, 9-11 October 2023.

AI-based workflow for predicting and optimizing the LDDC criterion in urban areas based on Computational Fluid Dynamics simulations

J. Werner, D. Nowak, F. Hunger, T. Johnson, A. Mark, F. Edelvik. Kaiserslautern Applied and Industrial Mathematics Days (KLAIM2023), 25-27 September 2023, Abstract No. A23, p.36.

Multi-Physics Simulation in the Urban Environment Facilitating Digital Twins of Cities

F.Hunger, A. Mark, A. Ullrich, F.Edelvik, III International Conference on Computational Science and AI in Industry (CSAI 2023), Trondheim, Norway, 28-30 August 2023.

A multi-scale simulation method for powder coating with moving powder guns

T. Johnson, A. Ruggiu, M. Quast, K. Pulli, A. Mark, M. Bader, N. Sandgren, M. Cudazzo, F. Edelvik. Journal of Electrostatics, Vol. 125, September 2023. Online 27 August 2023

Iterative solution of spatial network models by subspace decomposition

M. Görtz, F. Hellman, A. Målqvist. Mathematics of Computation, Vol 93, January 2024, pp. 233–258. Online June 20, 2023

Computationally efficient domain decomposition and near-bell coupling of rotary spray paint bells

D. Andersson. Master thesis, Chalmers University of Technology, 12 June 2023. Supervisors: T. Johnson, A. Ruggiu

Parallel optimization for model calibration of large scale particle systems

A. Samuelsson. Master thesis, Chalmers University of Technology, 12 June 2023. Supervisors: J. Quist, C. Cromvik.

Numerical and Analytical Evaluation of Load Distribution Patterns on Ballasted Concrete Railway Bridges

A. Eriksson, A. Ullrich, C. Wang, J. Gonzalez-Libreros, J. Johansson, O. Enoksson, J. Quist, G. Sas. Building for the Future: Durable, Sustainable, Resilient. fib Symposium 2023-Volume 2. Online 3 June 2023.

Multiscale methods for solving wave equations on spatial networks

M. Görtz, P. Ljung, A. Målqvist, Computer Methods in Applied Mechanics and Engineering, 410, March 2023.

Efficient and Robust Parameter Identification for Soil modeled via the Discrete Element Method

J. Jahnke, S. Steidel, M. Burger, K. Jareteg, J. Quist. Commercial Vehicle Technology 2022, ICVTS 2022. Online 28 February 2023

Addressing wind comfort in an urban area using an immersed boundary framework

P. Vanky, A. Mark, F. Hunger, M. Haeger-Eugensson, J. Tarraso, M. Adelfio, A. Sasic Kalagasidis, G. Sardina, Technische Mechanik, Vol. 43, Is.1, (2023), 151–161. 16 February 2023

Overview and comprehensive performance description of a new Micro Turbine Drilling – MTD technology for drilling laterals into hard reservoir rock

N. Geißler, F. Garsche, F. di Mare, R. Bracke. International Journal of Rock Mechanics and Mining Sciences, Vol 161, January 2023.

Simulation of Powder Coating

T. Johnson, F. Edelvik, FCC Technical Report 1/2022

Network model for predicting structural properties of paper

M. Görtz, G. Kettil, A. Målqvist, M. Fredlund, K. Wester, F. Edelvik. Nordic Pulp & Paper Journal, October 14 2022.

Coalescence-induced jumping of droplets from superhydrophobic surfaces – the effect of contact-angle hysteresis

K. Konstantinidis, J. Göhl, A. Mark, S. Sasic. Physics of Fluid, 2022. Online October 8.

A simulation study on the effect of layer thickness variation in selective laser melting

V. Ramesh Sagar, S. Lorin, K. Wärmefjord, R. Söderberg. Journal of Manufacturing Science and Engineering, 1-13. Online October 5, 2022.

Validation of an immersed boundary framework for urban flows

P. Vanky, A. Mark, M. Haeger-Eugensson, J. Tarraso, M. Adelfio, A. Sasic Kalagasidis, G. Sardina, The 18th International Conference on Fluid Flow Technologies Budapest, Hungary, August 30-September 2, 2022

Coalescence-induced jumping of microdroplets on superhydrophobic surfaces – A numerical study

K. Konstantinidis, J. Göhl, A. Mark, S. Sasic. The Canadian Journal of Chemical Engineering, August 5, 2022.

The Virtual PaintShop – Simulation of Oven Curing

T. Johnson, A. Mark, N. Sandgren, S. Sandgren, L Erharldsson, F. Edelvik. 21st ECMI Conference on Industrial and Applied Mathematics, ECMI 2021, 13-15 April 2021, published online 11 July 2022.

Using the Octree Immersed Boundary Method for urban wind CFD simulations

R. Mitkov, M. Pantusheva, V. Naserentin, P. O. Hristov, D. Wästberg, F. Hunger, A. Mark, D. Petrova-Antonova, F. Edelvik, A. Logg, IFAC Workshop Control for Smart Cities – CSC 2022, 27-30 June 2022.

Efficient Simulation of Convective Ovens in Automotive Paintshops

T. Johnson, A. Mark, N. Sandgren, L. Erhardsson, S. Sandgren, F. Edelvik. Journal of Heat Transfer. September 2022, 144(9):094501. Online June 7 2022.

Development of a DEM-FEM framework for infrastructure simulation

A. Ullrich. Master thesis, Chalmers University of Technology, 2 June 2022. Supervisor: E. Solberg, Co-supervisors: K. Jareteg, C. Cromvik.

Virtuella metoder för svetssimulering

S. Lorin. Svetsen #2 2022, p 46-47.

A Lagrangian-Eulerian simulation method for viscoelastic flows applied to adhesive joining

S. Ingelsten, PhD thesis, Chalmers University of Technology, 6 May 2022. Supervisor Roland Kádár, co-supervisors Andreas Mark, Fredrik Edelvik.

Experimental validation and numerical upscaling of linear network models for simulation of paper

M. Görtz. Licentiate thesis, Chalmers University of Technology, 22 April 2022. Supervisors: A. Målqvist, F. Edelvik, G. Kettil

Design and biofabrication of a leaf-inspired vascularized cell-delivery device

S. Sämfors, E. M. Niemi, K. Oskarsdotter, C. Villar Egea, A. Mark, H. Scholz, P. Gatenholm. Bioprinting, Online 1 March 2022.

A New Heat Source Model for Keyhole Mode Laser Welding

S. Lorin, J. Madrid, R. Söderberg, K. Wärmefjord. Journal of Computing and Information Science in Engineering, 22(1): 011004 (10 pages), February 2022.

Insights from utilizing DEM for re-design of a cone crusher feed system

M. Evertsson, J. Quist, K. Jareteg. Proceedings - Conference in Minerals Engineering, Luleå Technical University, 8-9 Feb 2022.

Simulation of viscoelastic squeeze flows for adhesive joining applications

S. Ingelsten, A. Mark, R. Kádár, F. Edelvik, Journal of Non-Newtonian Fluid Mechanics, Vol. 300 February 2022, Available online 1 January 2022.

Micro Turbine Drilling – MTD

N. Geißler, F. Garsche, V. Samus, R. Bracke. Der Geotherimie Kongress 2021 (DGK), 30 November- 2 December 2021, Virtual.

A Simulation Study on the Effect of Particle Size Distribution on the Printed Geometry in Selective Laser Melting

V. Ramesh Sagar, S. Lorin, J. Göhl, J. Quist, K. Jareteg, C. Cromvik, A. Mark, F. Edelvik, K. Wärmefjord, R. Söderberg. Journal of Manufacturing Science and Engineering May 2022, 144(5): 051006 (10 pages). Online: 25 October 2021.

Mikro-Turbine fräst Pfade in Granit (in German)

N. Geißler, O+P Fluidtechnik 10/2021, p. 45. October 2021.

Applied Calibration and Validation Method of Dynamic Process Simulation for Crushing Plants

K. Bhadani, G. Asbjörnsson, B. Schnitzer, J. Quist, C. Hansson, E. Hulthén, M. Evertsson. Minerals 11, no. 9: 921. 25 August 2021.

A hydrodynamic basis for off-axis Brownian diffusion under intermediate confinements in micro-channels

A.S. Kannan, A. Mark, D. Maggiolo, G. Sardina, S. Sasic, H. Ström. International Journal of Multiphase Flow, Vol. 143, 2021, 103772, 9 August 2021.

Mikro-Turbine fräst Pfade in Granit (in German)

N. Geißler, BBR 07/08 2021, p. 10. 27 July 2021.

Thixotropy of cellulose nanocrystal suspensions

M. Fazilati, S. Ingelsten, S. Wojno, T. Nypelö, R. Kádár. Journal of Rheology 65(2021). Online 19 July 2021.

Simulation of jet printing of solder paste for surface mounted technology

G.E. Mårtensson, J. Göhl, A. Mark, Soldering & Surface Mount Technology, Online 13 May 2021.

A new heat source model for keyhole mode laser welding

S. Lorin, J. Madrid, R. Söderberg, K. Wärmefjord. Journal of Computing and Information Science in Engineering, 1-14. Online 11 May, 2021.

Simulering av Ugnshärdning

F. Edelvik, T. Johnson, A. Mark. Ytforum, 2:17-18, Mars 2021.

Bubbly flows instabilities in the Eulerian-Eulerian and Eulerian-Lagrangian frameworks

G. Sardina, K. Jareteg, H. Ström, S. Sasic. 1st BICTAM-CISM Symposium on Dispersed Multiphase Flows: from Measuring to Modeling, Beijing, China. 3-5 March 2021.

Efficient Spot Welding Sequence Simulation in Compliant Variation Simulation

R. Sadeghi Tabar, S. Lorin, C. Cromvik, L. Lindkvist, K. Wärmefjord, R. Söderberg. Journal of Manufacturing Science and Engineering, Jul 2021, 143(7): 071009 (10 pages). Online 26 February 2021.

A Backwards-Tracking Lagrangian-Eulerian Method for Viscoelastic Two-Fluid Flows

S. Ingelsten, A. Mark, R. Kádár, F. Edelvik. Appl. Sci. 2021, 11, 439. 5 January 2021.

The Knudsen Paradox in Micro-Channel Poiseuille Flows with a Symmetric Particle

A. S. Kannan, T. S. B. Narahari, Y. Bharadhwaj, A. Mark, et al. Applied Sciences 11 (1), 351, 31 December 2020.

Investigating the Sensitivity of Particle Size Distribution on Part Geometry in Additive Manufacturing

V. Sagar, S. Lorin, J. Göhl, J. Quist, C. Cromvik, A. Mark, K Jareteg, F. Edelvik, K. Wärmefjord, R. Söderberg. ASME International Mechanical Engineering Congress and Exposition, 18 November 2020.

Efficient spot welding sequence simulation in compliant variation simulation

R.S. Tabar, S. Lorin, C. Cromvik, L. Lindkvist, K. Wärmefjord, R. Söderberg. ASME International Mechanical Engineering Congress and Exposition, 18 November 2020.

Simulation-based path generation with automized quality control for painting in small lot sizes

N. Güttler, N. Sandgren, S. Weber, P. Knee, R. Salman, J. Klier, F. Edelvik, O. Tiedje. Stuttgart Automotive Production conference SCAP2020, 9-10 November 2020.

Multicriteria Optimization of an Oven with a Novel ε-constraint Based Sandwiching Method

D. Nowak, T. Johnson, A. Mark, C. Ireholm, F. Pezzotti, L. Erhardsson, D. Ståhlberg, F. Edelvik, K-H Küfer. Journal of Heat Transfer, 143(1) 012101, online 4 November 2020

A Robust Design Perspective on Factors Influencing Geometric Quality in Metal Additive Manufacturing

V. R. Sagar, S. Lorin, K. Wärmefjord, R. Söderberg. Journal of Manufacturing Science and Engineering, 1-35, 12 October 2020.

Assessment of hindered diffusion in arbitrary geometries using a multiphase DNS framework

A. S. Kannan, A. Mark, D. Maggiolo, G. Sardina, S. Sasic, H. Ström. Chemical Engineering Science, Volume 230, 116074, online 28 September 2020

A backwards-tracking Lagrangian-Eulerian method for viscoelastic free surface flow simulation

S. Ingelsten, R. Kádár, A. Mark, F. Edelvik. Annual Transactions of the Nordic Rheology Society, vol 28, August 2020.

A numerical multiscale method for fiber networks

M. Görtz, G. Kettil, A. Målqvist, A. Mark, F. Edelvik. WCCM-ECCOMAS 2020 proceedings, Paris, France, July 2020.

A GPU Polyhedral Discrete Element Method

A. Bilock. Master thesis, Chalmers University of Technology, 3 June 2020. Supervisor: K. Jareteg.

Development of a Rigid Body Dynamics Coupling to DEM for Roller Compaction

J. Göransson Axås. Master thesis, Chalmers University of Technology, 1 June 2020. Supervisor: J. Quist.

A Lagrangian-Eulerian simulation framework for viscoelastic fluid flows

S. Ingelsten, Licentiate thesis, Chalmers University of Technology, 28 April 2020. Supervisors: R. Kádár, A. Mark, F. Edelvik.

Computationally efficient viscoelastic flow simulation using a Lagrangian-Eulerian method and GPU-acceleration

S. Ingelsten, A. Mark, K. Jareteg, R. Kádár, F. Edelvik. Journal of Non-Newtonian Fluid Mechanics. Online 18 March 2020, 104264.

Numerical upscaling of discrete network models

G. Kettil, A. Målqvist, A. Mark, M. Fredlund, K. Wester, F. Edelvik, Numerical upscaling of discrete network models. Bit Numer Math 60, 67–92, March 2020.

A continuum-based multiphase DNS method for studying the Brownian dynamics of soot particles in a rarefied gas

A. S. Kannan, A. Mark, V. Naserentin, G. Sardina, D. Maggiolo, S. Sasic, H. Ström. Chemical Engineering Science, Vol. 210, 115229, December 2019.

Large scale simulation of particle coating using coupled CFD-DEM

A. Hariharan. Master Thesis, Chalmers University of Technology, 12 September 2019. Supervisor: K. Jareteg.

Modeling of Steel Reinforced Flexible Hose

S. Paramasivam. Master Thesis, Chalmers University of Technology, 19 August 2019. Supervisors: C. Cromvik and F. Andersson.

A numerical framework for simulation of swirled adhesive application

S Ingelsten, R Kádár, A Mark, F Edelvik. Annual Transactions of the Nordic Rheology Society, Vol. 27, August 2019.

Numerical investigation of upstream cylinder flow and characterization of forming fabrics

G. Kettil, A. Mark, K. Wester, M. Fredlund, F. Edelvik. Nordic Pulp & Paper Research Journal, 34(3), pp. 371-393. Online 12 July, 2019.

Robust and Fast Simulation of Flexible Flat Cables

M Roller, C Cromvik, J Linn. ECCOMAS 2019. Computational Methods in Applied Sciences, vol 53, pp.207-214. 28 June 2019.

A Virtual Design of Experiments Method to Evaluate the Effect of Design and Welding Parameters on Weld Quality in Aerospace Applications

J. Madrid, S. Lorin, R. Söderberg, P. Hammersberg, K. Wärmefjord, J. Lööf. Aerospace 2019, 6(6), 74. 20 June, 2019

Efficient viscoelastic flow computation using a Lagrangian-Eulerian method and GPU-acceleration

S. Ingelsten, A. Mark, R. Kádár, F. Edelvik. 19th International Workshop on Numerical Methods for Non-Newtonian Flows, Peso da Régua, Portugal, 16-20 June, 2019.

Multiscale methods for simulation of paper making

G. Kettil, PhD thesis, Chalmers University of Technology and University of Gothenburg. Supervisors A. Mark and A. Målqvist. 3 June 2019.

A novel multiphase DNS method for the resolution of Brownian motion in a weakly rarefied gas using a continuum framework

A.S. Kannan, V. Naserentin, A. Mark, D. Maggiolo, G. Sadina, S. Sasish, H. Ström. 10th International Conference on Multiphase Flow, ICMF, Rio de Janeiro, Brazil, 19-24 May 2019.

A Three Phase Conjugated Heat Transfer Solver Applied To Additive Manufacturing

A. Mark, J. Göhl, S. Ingelsten, T. Johnson, F. Edelvik. 10th International Conference on Multiphase Flow, ICMF, Rio de Janeiro, Brazil, 19-24 May 2019.

A Surrogate Based Modelling and Optimization Methodology for Calibration and Engineering Design Using DEM

J. Quist, K. Jareteg, E. Solberg, F. Edelvik. Proceedings PARTEC 2019 - International congress on Particle Technology, Nürnburg, Germany, 9-11 April, 2019.

Nonlinear Material Model in Part Variation Simulations of Sheet Metals

S. Camuz, S. Lorin, K. Wärmefjord, R. Söderberg. J. Comput. Inf. Sci. Eng 19(2), 021012. 18 March, 2019.

Assessing the ability of the Eulerian-Eulerian and the Eulerian-Lagrangian frameworks to capture meso-scale dynamics in bubbly flows

G. Sardina, K. Jareteg, H. Ström, S. Sasic. Chemical Engineering Science, Vol. 201, 29 June 2019, pp. 58-73. Online 1 March, 2019

A Lagrangian-Eulerian framework for simulation of transient viscoelastic fluid flow

S. Ingelsten, A. Mark, F. Edelvik. Journal of Non-Newtonian Fluid Mechanics, Vol. 266, April 2019, pages 20-32. Online 12 February, 2019.

Modeling of Temperature Dependent Surface Tension Force

V. Nilsson. Master Thesis, Chalmers University of Technology, 12 December 2018. Supervisors: Johan Göhl and Andreas Mark

Efficient Compliant Variation Simulation of Spot-Welded Assemblies

S. Lorin, B. S. Lindau, L. Lindkvist, R. Söderberg. Journal of Computing and Information Science in Engineering, 19(1), 011007. 19 November, 2018.

Efficient Variation Simulation of Spot-Welded Assemblies

S. Lorin, B. Lindau, R. S. Tabar, L. Lindkvist, K. Wärmefjord, R. Söderberg. Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE2018, Pittsburgh, Pennsylvania, USA, 9-15 November, 2018.

An immersed boundary based dynamic contact angle framework for handling complex surfaces of mixed wettabilities

J. Göhl, A. Mark, S. Sasic, F. Edelvik. International Journal of Multiphase Flow, 2018, ISSN 0301-9322, Online 13 August 2018

Minimizing Weld Variation Effects Using Permutation Genetic Algorithms and Virtual Locator Trimming

A. Forslund, S. Lorin, L. Lindkvist, K. Wärmefjord, R. Söderberg. Journal of Computing and Information Science in Engineering 18 (4), 041010, 6 August, 2018.

A splitting algorithm for simulation-based optimization problems with categorical variables

Z. Nedělková, C. Cromvik, P. Lindroth, M. Patriksson, A-B Strömberg. Engineering Optimization, Volume 51, Issue 5, 2019, 815-831. Online 30 July, 2018.

Simulations of 3D bioprinting: predicting bioprintability of nanofibrillar inks

J. Göhl, K. Markstedt, A. Mark, K. Håkansson, P. Gatenholm, F. Edelvik. Biofabrication, Vol. 10, No. 3, 18 June 2018.

Simulating the dispensing of complex rheological fluids on arbitrary geometries using the immersed boundary method

S. Ingelsten, J. Göhl, A. Mark, F. Edelvik, Annual Transactions of the Nordic Rheology Society, Vol. 26, June 2018

Numerical modelling of paint curing in convective ovens

M. Vasudevan. Master thesis, Chalmers University of Technology, 12 June 2018. Supervisors: Andreas Mark, Tomas Johnson and Tommy Andersson.

Coupling Algorithms for Fluid Structure Interaction at Low Density Ratios

M. Ottosson. Master thesis, Chalmers University of Technology, 12 June 2018. Supervisor Andreas Mark and Christoffer Cromvik.

A Multiscale Methodology for Simulation of Meccanical Properties of Paper

G. Kettil, A. Målqvist, A. Mark, F. Edelvik, M. Fredlund, K. Wester. 6th European Conference on Computational Mechanics (ECCM 6) 7th European Conference on Computational Fluid Dynamics (ECFD 7), ECCM-ECFD 2018. 11-15 June 2018, Glasgow, UK.

A Multiscale Methodology for Simulation of Mechanical Properties of Paper

G. Kettil, A. Målqvist, A. Mark, F. Edelvik, M. Fredlund, K. Wester. 6th European Conference on Computational Mechanics, Glasgow, UK, June 2018.

Multiobjective Optimization of a Heat-Sink Design Using the Sandwiching Algorithm and an Immersed Boundary Conjugate Heat Transfer Solver

T. Andersson, D. Nowak, T. Johnson, A. Mark, F. Edelvik, K. Küfer. ASME. J. Heat Transfer. 2018;140(10):102002-102002-10, 25 May 2018.

An information and simulation framework for increased quality in welded components

R. Söderberg, K. Wärmefjord, J. Madrid, S. Lorin, A. Forslund, L. Lindkvist. . CIRP Annals, online 24 May 2018

An information and simulation framework for increased quality in welded components

R. Söderberg, K. Wärmefjord, J. Madrid, S. Lorin, A. Forslund, L. Lindkvist. CIRP Annals, Online 24 May, 2018.

Simulation of high-pressure washing of engine blocks

M. Carlsson, R. Ask, N. Sandgren, S. Jakobsson, F. Edelvik, L. Hanson. In proceedings from 51st Conference on Manufacturing Systems - CIRP CMS 2018, Stockholm, May 2018, Procedia CIRP, 72:416-419, 2018.

SelfPaint – A self-programming paint booth

F. Edelvik, O. Tiedje, J. Jonuscheit, J. S. Carlson. In proceedings from 51st Conference on Manufacturing Systems - CIRP CMS 2018, Stockholm, May 2018, Procedia CIRP, 72:474-479, 2018.

A virtual framework for simulation of complex viscoelastic flows

S. Ingelsten, J. Göhl, A. Mark, F. Edelvik. In proceedings from 51st Conference on Manufacturing Systems - CIRP CMS 2018, Stockholm, May 2018, Procedia CIRP, 72:392-397, 2018.

JFNK Preconditioning for coupled BWR calculations

C. Demazière, S. González-Pintor, A. Ålund.Proceedings of the PHYSOR 2018, Cancun, Mexico, Cancun, Mexico, 22-26 April 2018.

Robust intersection of structured hexahedral meshes and degenerate triangle meshes with volume fraction applications

F. Svelander, G. Kettil, T. Johnson, A. Mark, A. Logg, F. Edelvik. Numerical Algorithms, 77(4):1029–1068, April 2018.

Selbstprogrammierende Lackierzelle

N. Güttler, O. Tiedje, J, Jonuscheit, F. Edelvik. JOT Journal für Oberflächentechnik, 57(12):16-21, December 2017.

Optimizing and Approximating Algorithms for the Single and Multiple Agent Precedence Constrained Generalized Traveling Salesman Problem

R. Salman, Licentiate thesis, Chalmers University of Technology, supervisors F. Ekstedt, P. Damaschke, 17 November 2017.

Minimizing Weld Variation Effects Using Permutation Genetic Algorithms and Virtual Locator Trimming.

A. Forslund, S. Lorin, L. Lindkvist, K. Wärmefjord, R. Söderberg. Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition, IMECE2017, Tampa, Florida, USA, 5-8 November 2017.

Non-Rigid Variation Simulation Using the Sherman-Morrison-Woodbury Formulas

S. Lorin, B. Lindau, L. Lindkvist, R. Söderberg. Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition, IMECE2017, Tampa, Florida, USA, 5-8 November 2017.

Development of fine-mesh methodologies for coupled calculations in Light Water Reactors

K. Jareteg, PhD thesis, Chalmers University of Technology, supervisors Prof. C. Demaziere, Assoc. Prof. P. Vinai, Prof. S. Sasic, 29 September 2017.

Assessment of pore diffusion in a micro-channel using an immersed boundary method

A. S. Kannan , A. Mark, F. Edelvik, G. Sardina, S. Sasic, H. Ström. Conference Proceedings of the 14th Conference on Multiphase Flows in Industrial plants (MFIP17), Brescia, Italy, 13-15 September 2017.

Math-Based Algorithms and Software for Virtual Product Realization Implemented in Automotive Paint Shops

F. Edelvik, A. Mark, N. Karlsson, T. Johnson, J. S. Carlson. Math for the Digital Factory. Mathematics in Industry, vol 27, pp 231-251, 22 July 2017.

Simulation of adhesive material using a novel viscoelastic stress method

S. Ingelsten, A. Mark, F. Edelvik, P-J Wahlborg. Annual Transactions of the Nordic Rheology Society, Vol. 25, April 2017.

QZ-Decomposition For Matrix-Free Sweep with High Order DG-FEM

S. González-Pintor, A. Ålund, C. Demazière. Int. Conf. Mathematics & Computational Methods Applied to Nuclear Science & Engineering (M&C 2017), Jeju, Korea, 16-20 April 2017.

Joining in Nonrigid Variation Simulation

K. Wärmefjord, R. Söderberg, B. Lindau, L. Lindkvist and S. Lorin. Prof. Razvan Udroiu (Ed.), InTech. Computer-aided Technologies - Applications in Engineering and Medicine, chap 3, p. 41-68. December 7, 2016.

On the advancement and software support of decision-making in focused ultrasound therapy: Advancement and software support of decision-making in FUS

A. Scherrer, S. Jakobsson, K-H Küfer. Journal of Multi-Criteria Decision Analysis 23(5), November 2016

Urban CFD Simulation Using Point Cloud Data

S. Ingelsten, A. Mark, F. Edelvik, A. Logg, M. Österbring. In proceedings from "29th Nordic Seminar on Computational Mechanics", Gothenburg, Sweden, October 26-28, 2016.

Geometry Assurance Integrating Process Variation With Simulation of Spring-In for Composite Parts and Assemblies

C. Jareteg, K. Wärmefjord, C. Cromvik, R. Söderberg, L. Lindkvist, J. S. Carlson, F. Edelvik. ASME Journal of Computing and Information Science in Engineering, 16(3), September 2016.

A Novel Fiber Interaction Method for Simulation of Early Paper Forming

G. Kettil. Licentiate thesis, Chalmers University of Technology and University of Gothenburg, supervisor A. Målqvist and A. Mark, August 2016.

Robust intersection of hexahedral meshes and triangle meshes with applications in finite volume methods

F. Svelander. Licentiate thesis, Chalmers University of Technology and University of Gothenburg, supervisors A. Mark and A. Logg, August 2016.

Spectral properties of renormalization for area-preserving maps

D. Gaidashev, T. Johnson. Discrete and Continuous Dynamical Systems - Series A, 36(7):3651-3675, July 2016.

A parallel splitting wavelet method for 2D conservation laws

A. A. Schmidt, A. J. Kozakevicius, S. Jakobsson. In proceedings of International Conference of Numerical Analysis and Applied Mathematics 2015 (ICNAAM 2015), AIP Conference Proceedings 1738, 030018 (2016).

Geometrical Optimization of Plate-Fin Heat-Sink

D. Irawan. Master thesis, Chalmers University of Technology, supervisors T. Andersson and A. Mark, June 2016.

Machine Learning Based Error Prediction for Spray Painting Applications

P. Lange. Master thesis, Chalmers University of Technology, supervisor N. Karlsson, June 2016.

Implementation and Validation of Dynamic Contact Angle Models

J. Göhl. Master thesis, Chalmers University of Technology, supervisors A. Mark and M. Svensson, June 2016.

Conjugated heat transfer simulation of a heated cylinder and an electronic device with the hybrid immersed boundary method

F. Svelander, A. Mark, T. Johnson, F. Edelvik. ECMI 2016 Book of Abstracts, Presented at 19th European Conference on Mathematics for Industry, Santiago de Compostela (Spain), June, 13-17, 2016. s. 485.

Simulation of Droplet Jetting of a Non-Newtonian Mixed Suspension

M. Svensson, A. Mark, F. Edelvik, A. Karawajczyk, G. Mårtensson. ICMF-2016 – 9th International Conference on Multiphase Flow, May 22nd – 27th 2016, Firenze, Italy.

Lay Down Simulation of Viscoelastic Fluids Using the Hybrid Immersed-Boundary Method

A. Mark, S. Ingelsten, F. Edelvik. ICMF-2016 – 9th International Conference on Multiphase Flow, May 22nd – 27th 2016, Firenze, Italy.

Process Simulation and Automatic Path Planning of Adhesive Joining

M. Svensson, A. Mark, F. Edelvik, J. Kressin, R. Bolin, D. Segerdahl, JS Carlson, P-J Wahlborg, M. Sundbäck. Procedia CIRP, 6th CIRP Conference on Assembly Technologies and Systems (CATS), May 16-18, 2016, Gothenburg, Sweden. Volume 44, 2016, Pages 298–303 (Online 11 May, 2016).

Simulation of the spherical orientation probability distribution of paper fibers in an entire suspension using immersed boundary methods

T. Johnson, P. Röyttä, A. Mark, F. Edelvik. Journal of Non-Newtonian Fluid Mechanics, 229:1-7, March 2016.

Rigidity for infinitely renormalizable area-preserving maps

D. Gaidashev, T. Johnson, M. Martens. Duke Mathematical Journal, Volume 165, Number 1 (2016), 129-159

Efficient Contact Modeling in Non-Rigid Variation Simulation

B. Lindau, S. Lorin, L. Lindkvist, R. Söderberg. Efficient Contact Modeling in Non-Rigid Variation Simulation. ASME. Journal of Computing and Information Science in Engineering. November 26, 2015.

A multi-scale simulation method for the prediction of edge wicking in multi-ply paperboard

T. Johnson, A. Mark, J. Nyström, S. Rief, M. Fredlund, M. Rentzhog, U. Nyman, J. Tryding, R. Lai, L. Martinsson, K. Wester and F. Edelvik. Nordic Pulp & Paper Research Journal, 2015, 30(4), 640-650

Detailed Simulations of Early Paper Forming

G. Kettil, A. Mark, F. Svelander, R. Lai, K. Wester, M. Fredlund, M. Rentzhog, F. Edelvik. COST FP1005 Fibre Suspension Flow Modelling Final Conference Trondheim 2015 June 9-11 2015

Novel Contact Forces for Immersed Boundary Paper Forming Simulations

G. Kettil, A. Mark, F. Svelander, R. Lai, L. Martinsson, K. Wester, M. Fredlund, M. Rentzhog, U. Nyman, J. Tryding, F. Edelvik. PF2 - The Past, Present and Future of CFD Papermaking; PaperCon 2015 Atlanta, April 19-22 2015 (Online proceeding)

A domain decomposition method for three species modeling of multi-electrode negative corona discharge – With applications to electrostatic precipitators

B. Wettervik, T. Johnson, S. Jakobsson, A. Mark, F. Edelvik. Journal of Electrostatics, 2015, 77, 139-146.

Three-species negative corona discharge simulations using domain decomposition

B. Svedung Wettervik. Master thesis, Chalmers University of Technology, supervisor T. Johnson, May 2015.

Variation Simulation Customized for Composites by Including FEM Simulations of Orthotropic Lamina

C. Jareteg. Licentiate thesis, Chalmers University of Technology and University of Gothenburg, supervisors S. Larsson and F. Edelvik, June 2015.

Simulation of Electro-Optic Modulators by a Time-Domain Beam-Propagation Method

E. Solberg. Licentiate thesis, Chalmers University of Technology and University of Gothenburg, supervisors S. Larsson and F. Edelvik, April 2015.

Welding Simulation of Non-Nominal Structures With Clamps

S. Lorin, C. Cromvik, F. Edelvik, R. Söderberg. Journal of Computing and Information Science in Engineering, 15(2), April 08, 2015.

Direct Liquid Cooling for an Outer-Rotor Direct-Drive Permanent-Magnet Synchronous Generator for Wind Farm Applications

M. Polikarpova, P. Ponomarev, P. Röyttä, R. S. Semken, Y. Alexandrova, J. Pyrhönen, IET Electric Power Applications, Volume 9, Issue 8, September 2015, p. 523 – 532.

A finite volume method for electrostatic three species negative corona discharge simulations with application to externally charged powder bells

T. Johnson, S. Jakobsson, B. Wettervik, B. Andersson, A. Mark, F. Edelvik. Journal of Electrostatics, 2015, 74, 27–36.

On the Robustness of the Volumetric Shrinkage Method in the Context of Variation Simulation

S. Lorin, C. Cromvik, F. Edelvik, L. Lindkvist, R. Söderberg. In proceedings from ASME IMECE 2014, Montreal, Canada, November 2014.

Variation simulation for composite parts and assemblies including variation in fiber orientation and thickness

C. Jareteg, K. Wärmefjord, R. Söderberg, L. Lindkvist, J. S. Carlson, C. Cromvik, F. Edelvik. In proceedings from the 5th CATS 2014 - CIRP Conference on Assembly Systems and Technologies, Dresden, Germany, November 2014.

Geometry Assurance Integrating Process Variation with Simulation of Spring-in for Composite Parts and Assemblies

C. Jareteg, K. Wärmefjord, C. Cromvik, R. Söderberg, L. Lindkvist, J. S. Carlson, F. Edelvik. In proceedings from ASME IMECE 2014, Montreal, Canada, November 2014.

A time domain beam propagation method for chirped signals

S. Jakobsson, E. Solberg, F. Edelvik. In proceedings from ST12 - Métodos Numéricos e Aplicações do CNMAC 2014.

Simulation of non-nominal welds by resolving the melted zone and its implication to variation simulation

S. Lorin, C. Cromvik, F. Edelvik, L. Lindkvist, R. Söderberg, K. Wärmefjord. Proceedings of the ASME 2014 IDETC/CIE, Buffalo, New York, USA, August 17-20, 2014.

Optimisation of robotised sealing stations in paint shops by process simulation and automatic path planning

A. Mark, R. Bohlin, D. Segerdahl, F. Edelvik, J. S. Carlson, International Journal of Manufacturing Research, 2014, 9(1), 4–26.

Contact Force Modeling in the Paper Forming Process

G. Kettil, F. Svelander, Master thesis, Chalmers University of Technology, supervisor A. Mark, examiner Anders Logg, June 2014.

Statistical methods for estimation of paint thickness and its variance

H. Marling, Master thesis, Chalmers University of Technology, supervisors F. Ekstedt, B. Andresson, June 2014.

Simulation of a highly elastic structure interacting with a two-phase flow

E. Svenning, A. Mark and F. Edelvik, Journal of Mathematics in Industry, June 3, 2014, 4:7.

Welding Simulation of Non-Nominal Structures with Clamps

S. Lorin, C. Cromvik, F. Edelvik, R. Söderberg, In proceedings from the 12th CATS 2014 - CIRP Conference on Computer Aided Tolerancing, 2014.

Variation Simulation of Welded Assemblies Using a Thermo-Elastic Finite Element Model

S. Lorin, C. Cromvik, F. Edelvik, L. Lindkvist, R. Söderberg, Journal of Computing and Information Science in Engineering, Apr 28, 2014, 14(3), 031003, 6 pages.

Influence of the axial turbine design parameters on the stator–rotor axial clearance losses

A. Grönman, T. Turunen-Saaresti, P. Röyttä, A. Jaatinen-Värri. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy August 2014 vol. 228 no. 5 482-490.

Efficient numerical simulation of spray painting processes

F. Edelvik, A. Mark, C. Zémerli, O. Hermanns, In proceeding from Third Commercial Vehicle Technology Symposium, Kaiserslautern, Germany, pp. 499-508, March 2014.

Particle Swarm Optimization Applied to EEG Source Localization of Somatosensory Evoked Potentials

Y. Shirvany, Q. Mahmood, F. Edelvik, S. Jakobsson, A. Hedström, M. Persson. IEEE Transactions on Neural Systems and Rehabilitation Engineering, January 2014, Vol. 22 (1), 11-20.

Modeling and simulation of rotary bell spray atomizers in automotive paint shops

B. Andersson, PhD thesis, Chalmers University of Technology, supervisor A. Mark, L. Davidson, December 2013.

A Modified TAB Model for Simulation of Atomization in Rotary Bell Spray Painting

B. Andersson, V. Golovitchev, S. Jakobsson, A. Mark, F. Edelvik, L. Davidson, J. S. Carlson. Journal of Mechanical Engineering and Automation 2013, 3(2), 54-6.

Simulation of electrostatic rotary bell spray painting in automotive paint shops

A. Mark, B. Andersson, S. Tafuri, K. Engström, H. Söröd, F. Edelvik, J. S. Carlson, Automization & Sprays, 2013, 23(1), 25-45.

Evaluation of a Finite-Element Reciprocity Method for Epileptic EEG Source Localization: Accuracy, Computational Complexity and Noise Robustness

Y. Shirvany, T. Rubaek, F. Edelvik, S. Jakobsson, O. Talcoth, M. Persson, Biomedical Engineering Letters, March 2013, 3(1), 8-16.

Application of particle swarm optimization in epileptic spike EEG source localization

Y. Shirvany, F. Edelvik, S. Jakobsson, A. Hedström, M. Persson. Applied Soft Computing, May 2013, 13(5), 2515–2525.

An immersed boundary method for simulation of flow with heat transfer

A. Mark, E. Svenning, F. Edelvik, International Journal of Mass and Heat Transfer, 2013, 56(1-2), 424-435.

An Incompressible Navier-Stokes Equations Solver on the GPU Using CUDA

N. Karlsson, Master thesis, Chalmers University of Technology, supervisor A. Mark, examiner U. Assarsson, August 2013.

Combining Variation Simulation With Thermal Expansion Simulation for Geometry Assurance

S. Lorin, L. Lindkvist, R. Söderberg, R. Sandboge. Journal of Computing and Information Science in Engineering, July 22, 2013, 13(3), 031007.

Multi-dipole EEG source localization using particle swarm optimization

Y. Shirvany, F. Edelvik, M. Persson, IEEE Engineering in Medicine and Biology Society, July 2013, 6357-6360.

On the fully automatic construction of a realistic head model for EEG source localization

Q. Mahmood, Y. Shirvany, A. Mehnert, A. Chodorowski, J. Gellermann, F. Edelvik, A. Hedström, M. Persson. Proceedings from IEEE Engineering in Medicine and Biology Society (EMBC’13), 3331-3334, Osaka, Japan, 3-7 July 2013.

Simulation of a Non-Newtonian Dense Granular Suspension in a Microfluidic Contraction

A. Mark, R. Bohlin, D. Segerdahl, F. Edelvik. International Conference on Multiphase Flow, May 2013.

Influence of Different Sources of Noise on Epileptic Spike EEG Source Localization

Y. Shirvany, X. Chen, P. S Dhanpalwar, F. Edelvik and M. Persson, SPIE Medical Imaging conference, March 2013, 8672:86720N-1-10

Droplet Breakup in Automotive Spray Painting

Björn Andersson, Licenciate thesis, supervisor Andreas Mark, moderator Dr Anders Karlsson, Volvo, January 13, 2012.

3D Scanning and Automatic Path Planning of Paint Process in General Coating Industry

H. Söröd, R. Ingemarsson, A. Mark, R. Bohlin, D. Segerdahl, F. Edelvik, J. S. Carlson, Proc. from the 5th International Swedish Production Symposium SPS12, 2012, p. 21-25.

Non-Invasive EEG Source Localization Using Particle Swarm Optimization: A Clinical Experiment

Y. Shirvany, F. Edelvik, S. Jakobsson, A. Hedström, Q. Mahmood, A. Chodorowski, M. Persson, Proc. from 34th International Conference of the IEEE Engineering in Medicine & Biology Society, August 2012.

Multi-scale Simulation of Paperboard Edge Wicking Using a Fiber-resolving Virtual Paper Model

A. Mark, A. Berce, R. Sandboge, F. Edelvik, E. Glatt, S. Rief, A. Wiegmann, M. Fredlund, J. Amini, M. Rentzhog, R. Lai, L. Martinsson, U. Nyman, J. Tryding, Tappi Journal, 11(6):9-16, 2012.

Multiphase Simulation of Fiber Suspension Flows Using Immersed Boundary Methods

E. Svenning, A. Mark, F. Edelvik, E. Glatt, S. Rief, A. Wiegmann, L. Martinsson, R. Lai, M. Fredlund, U. Nyman, Nordic Pulp & Paper Research Journal, 27(2):184-191, 2012.

Modeling and Simulation of Paperboard Edge Wicking

A. Mark, J. Tryding, J. Amini, F. Edelvik, M. Fredlund, E. Glatt, R. Lai, L. Martinsson, U. Nyman, M. Rentzhog, S. Rief, A. Wiegmann. Nordic Pulp & Paper Research Journal, 2012, 27, 2, 397-402.

Improved Spray Paint Thickness Calculation From Simulated Droplets Using Density Estimation

S. Tafuri, F. Ekstedt, J. S. Carlson, A. Mark, F. Edelvik, International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Aug 2012 2012-70821, pp. 339-347

Solving inverse problems in EEG-based source localization by combining parametric and non-parametric methods

C Jareteg, Master thesis, University of Gothenburg, supervisor S Jakobsson, examiner S Larsson, June 2012.

Optimization of Robotized Sealing Stations in Paint Shops by Process Simulation and Automatic Path Planning

A. Mark, R. Bohlin, Daniel Segerdahl, Fredrik Edelvik, Johan S. Carlson, Proc. from the 5th International Swedish Production Symposium, November, 2012, SPS12, pp. 487-496

A Modified TAB Model for Simulation of Atomization in Rotary Bell Spray Painting

B. Andersson, V. Golovitchev, S. Jakobsson, A. Mark, F. Edelvik, L. Davidson, J.S. Carlson, Triennial International Conference on Liquid Atomization and Spray Systems, March 2012, 2163-2405.

Simulation of a Rubber Beam Interacting with a Two-Phase Flow in a Rolling Tank

E. Svenning, A. Mark, F. Edelvik, European Conference on Mathematics for Industry, Lund, Sweden, 2012.

Microstructure simulation of paper forming

E. Svenning, A. Mark, L. Martinsson, R. Lai, M. Fredlund, U. Nyman, F. Edelvik, Conference on Mathematics for Industry, 2012.

A Wave Propagation Solver for Computational Aero-Acoustics

E Solberg, Master thesis, University of Gothenburg, supervisor R Sandboge, examiner S Larsson, February 2012.

Advances in Neuro Diagnostic based on Microwave Technology. Transcranial Magnetic Stimulation and EEG Source Localization

M. Persson, T. McKelvey, A. Fhager, H.-S. Lui, Y. Shirvany, A. Chodoroski, Q. Mahmood, F. Edelvik, M. Thordstein, A. Hedström, M. Elam, Asia Pacific Microwave Conference, pp. 469-472, 2011.

Advances in neuro diagnostic based on microwave technology, transcranial magnetic stimulation and EEG source localization

M. Persson, T. McKelvey, A. Fhager, Y. Shirvany, A. Chodorowski, Q. Mahmood, F. Edelvik, M. Thordstein, A. Hedström, M. Elam. URSI General Assembly, August 2011, 469 - 472 .

Micromechanical network model for the evaluation of quality controls of paper

H. Andrä, F. Edelvik, M. Fredlund, E. Glatt, M. Kabel, R. Lai, A. Mark, L. Martinsson, U. Nyman, S. Rief, Progress in Paper Physics Seminar, Graz, Austria, September 2011, pp. 49-55.

Microstructure Simulation of Early Paper Forming Using Immersed Boundary Methods

A. Mark, E. Svenning, R. Rundqvist, F. Edelvik, E. Glatt, S. Rief, A. Wiegmann, M. Fredlund, R. Lai, L. Martinsson, U. Nyman. Progress in Paper Physics Seminar, September 2011, Graz, Austria, 283-290.

Microstructure simulation of early paper forming using immersed boundary methods

A Mark, E Svenning, R Rundqvist, F Edelvik, E Glatt, S Rief, A Wiegmann, M Fredlund, R Lai, L Martinsson, U Nyman, Tappi Journal, 10(11):23-30, 2011.

Comparison Between Different Immersed Boundary Conditions for Simulation of Complex Fluid Flows

A Mark, R Rundqvist, F Edelvik, Journal of Fluid Dynamics & Materials Processing, 7(3):241-258, 2011.

Modeling and Simulation of Sealing Spray Application Using Smoothed Particle Hydrodynamics

R Rundqvist, A Mark, F Edelvik, J S Carlson, Journal of Fluid Dynamics & Materials Processing, 7(3):259-278, 2011.

Multi-objective Optimization of Oven Curing in Automotive Paint Shops

M. Pieper, P. Klein, K-H Küfer, A. Mark, F. Edelvik. The 21st International Conference on Multiple Criteria Decision Making, June 2011.

Development of a nonlinear Finite Element beam model for dynamic contact problems

E. Svenning, Master thesis, Chalmers, supervisor B. Andersson, A. Mark, examiner K. Runesson, June 2011.

Simulation of Thermal Spraying in IPS Virtual Paint

A. Berce, Master thesis, Chalmers, supervisor B. Andersson, A. Mark, examiner L. Davidson, June 2011.

Modeling and simulation of viscoelastic fluids using Smoothed Particle Hydrodynamics

R. Rundqvist, A. Mark, F. Edelvik, J. S. Carlson, 7th International Conference on Multiphase Flow (ICMF), 2010.

Simulating Geometrical Variation in Injection Molding

S. Lorin, F. Edelvik, J. S. Carlson, R. Söderberg. In Proceedings of the NordDesign 2010 Conference, August 25 – 27, 2010, Göteborg, Sweden.

Multiobjective Optimization Applied to Design of PIFA Antennas

S. Jakobsson, B. Andersson, F. Edelvik, In Scientific Computing in Electrical Engineering SCEE 2008, Mathematics in Industry, Volume 14, Part 4, 437-444, Springer-Verlag Berlin Heidelberg, Germany, 2010.

Combustion engine optimization: a multiobjective approach

S. Jakobsson, M. Saif-Ul-Hasnain, R. Rundqvist, F. Edelvik, B. Andersson, M. Patriksson, M. Ljungqvist, D. Lortet, J. Wallesten. Optimization and Engineering, 2010, 11(4), 533-554.

A method for simulation based optimization using radial basis functions

S. Jakobsson, M. Patriksson, J. Rudholm, A. Wojciechowski. Optimization and Engineering, 2010, 11(4), 501-532.

Simulation of Spray Painting in Automotive Industry

R. Rundqvist, A. Mark, B. Andersson, A. Ålund, F. Edelvik, S. Tafuri, J. S. Carlson, In G. Kreiss et al. (eds.), Numerical Mathematics and Advanced Applications 2009, 769-777. 30 July, 2010.

Comparison Between Different Immersed Boundary Conditions for Simulation of Complex Fluid Flows

A. Mark, R. Rundqvist, F. Edelvik, 7th International Conference on Multiphase Flow (ICMF), Tampa, FL, USA, June 2010.

Modeling Surface Tension in SPH by Interface Reconstruction using Radial Basis Functions

B. Andersson, S. Jakobsson, A. Mark, F. Edelvik, L. Davidson, In proceedings of the 5th International SPHERIC Workshop, pp. 7-14,

Simulating Geometrical Variation in Injection Molding

S. Lorin, R. Söderberg, J. S. Carlson, F. Edelvik, International Conference on Methods and Tools for Product and Production Development, August 2010, 8(2) 395-404.

Rational radial basis function interpolation with applications to antenna design

S. Jakobsson, B. Andersson, F. Edelvik. Journal of Computational and Applied Mathematics, December 2009, 233(4), 889-904.

An Improved Method for Dipole Modeling in EEG-Based Source Localization

F. Edelvik, B. Andersson, S. Jakobsson, S. Larsson, M. Persson, Y. Shirvany, In World Congress of Medical Physics and Biomedical Engineering, Vol. 25/IX, pp. 146-149, München, Germany, September 2009.

Geometric Variation in Injection Molding

S. Lorin, Master thesis, Chalmers, supervisor F. Edelvik and J. S. Carlson, examiner I. Rychlik, June 2009.

Statistical methods for improving surrogate models in antenna optimization

D. Sjögren, Master thesis, Chalmers, supervisor S. Jakobsson, examiner Professor T. Norberg, April 2009.

Multi-Objective Optimization of MIMO Antenna Systems

A. Stjernman, A. Derneryd, S. Jakobsson, B. Andersson, F. Edelvik, 3rd European Conference on Antennas and Propagation, Berlin, Germany, March 2009.

Antennensysteme im Weltall

F. Edelvik. Fraunhofer-Gesellschaft Mediendienst 1-2008-Thema 5.

Multiobjective optimization Based on Surrogate Models Applied to Antenna Design

S. Jakobsson, B. Andersson, F. Edelvik. In 9th International Workshop on Finite Elements for Microwave Engineering, May 2008.

Simulation based multiobjective optimization of diesel combustion engines

M. S. Ul Hasnain, Master thesis, Chalmers, supervisor S. Jakobsson, examiner S. Andersson, March 2008.

Multiobjective Optimization for Computational Electromagnetics

S. Jakobsson, F. Edelvik, B. Andersson, In EMB07, Gothenburg, Sweden, pp. 99-104, October 2007.

Time Domain Finite Element Modeling of Thin Sheets and Coatings using Shell Elements

F. Edelvik, E. Abenius. In EMB07, Lund, Sweden, pp. 35-41, October 2007.

A Method for Simulation Based Optimization Using Radial Basis Functions

J. Rudholm and A. Wojciechowski, Master thesis, Chalmers, supervisor S. Jakobsson, examiner M. Patriksson, August 2007.

Virtuelle Blitzeinschläge – Blitze abblitzen lassen

F. Edelvik, Innovisions - Das Zukunftsmagazin des Fraunhofer-IuK-Verbunds, 2007, 4, 68-70.

Thin Sheet Modeling Using Shell Elements in the Finite-Element Time-Domain Method

E. Abenius, F. Edelvik, IEEE Transaction and Antennas and Propagation, 2006, 54(1), 28-34.

Construction of an Optimal Linkage Arm Using Structural Optimization

E. Gudfinnsson, N. Á. Sigfússon, Master thesis, Chalmers, supervisor A-B Strömberg, examiner M. Patriksson, May 2006.

Advances in Hybrid FDTD-FE Techniques

T. Rylander, F. Edelvik, A. Bondeson, D. J. Riley, In "Computational Electrodynamics: The Finite-Difference Time-Domain Method", 3rd edition, A. Taflove, S. Hagness (eds.), Artech House, Boston:MA, 2005.

Optimization of opportunistic replacement activities in deterministic and stochastic multi-component systems

N. Andréasson, Licentiate thesis, Chalmers, co-adviser A-B Strömberg, May 2004.
Photo credits: Nic McPhee